Tuesday, April 7, 2020

The working principle of stage dry ice machine

Do you know how to achieve the fairy-like smoke effect on the stage we often see? In fact, most of them are practical dry ice machines, so how does it work? Let me tell you below.

The principle of the stage dry ice machine is very simple. The internal heating is used to quickly sublimate the dry ice and guide it through the exhaust air. Because carbon dioxide is heavier than air and the temperature is very low, it will sink on the ground. The ice-cold carbon dioxide that is removed meets the surrounding air to condense the water vapor in the air and form small water droplets. The smoke is gone. This smoke effect is very environmentally friendly and is the most widely used stage smoke effect in the world.


The WUAI-3000 dry ice smoke machine uses the principle of -78 ℃ solid dry ice to generate a large amount of white smoke when heated and vaporized at normal temperature, providing a smoke effect for the stage. At present, small power dry ice machines under 3kW are used in China, which is suitable for a medium and small stage, but cannot be used for a large stage. High-power dry ice machines such as WUAI-6000 have a large smoke volume, emit smoke quickly, can quickly fill the stage, and have the advantages of environmental protection. They have been widely used in developed countries.

Doing dry ice experiment is the key to learn the knowledge of carbon dioxide dry ice

If you are determined to learn the knowledge of dry ice, then you must start with the practice of dry ice experiments, which can not only increase your interest in learning, but also enhance your understanding of dry ice phenomena, but also help you deepen your understanding of the concepts and principles of carbon dioxide dry ice At the same time, it will also strengthen your practical ability during the experiment using dry ice so that the knowledge you have mastered will never be forgotten.

Primary students should pay attention to the method of doing dry ice reaction experiment

First, the correct learning method is very important, to do the experiment must master the use of dry ice in the experiment. If you learn the Fa, you will get twice the result with half the effort; if you cannot learn the Fa, you will get twice the result with half the effort. Everything has its regularity. To learn dry ice, you must also master the regularity. If you simply memorize it hard and do not fully understand it, the knowledge gained is not systematic and comprehensive. Understanding is the basic condition of memory. If you understand the knowledge of dry ice, you will naturally remember it firmly. Why do some people think that dry ice knowledge is complex and difficult to remember? The reason is that the principle of dry ice is not mastered.

Doing dry ice-related experiments can cultivate your scientific attitude

Second, dry ice is a chemistry class, and chemical science is also experimental science. Chemical knowledge, like other scientific knowledge, is not understood at a glance and learned at a glance. It must be understood through hands-on experiments. Through hands-on experimental exercises, learn how to use dry ice in the experiment, carefully observe the phenomenon of dry ice smoking in the experiment, and discover the rules from it, in order to accurately and firmly grasp the basic knowledge of the sublimation experiment of dry ice.

Classroom chemistry teacher's explanation is also very important

In the classroom, the teacher systematically explained the concepts and laws of dry ice, guided us to carry out solid carbon dioxide experiments, organized us to discuss and explore new knowledge of dry ice, corrected our common mistakes, answered our difficulties, pointed out the focus of learning, and often pointed out ideas, Make a good demonstration of the use of scientific methods.

How to do dry ice experiment in experiment class

If any of the students have done dry ice in the laboratory, it will be clear. Therefore, in order to do the solid dry ice co2 experiment, before each experiment, you must clarify the purpose of the experiment and understand its principle, such as in the laboratory For the dry ice refrigeration test, you must know that you can't use ordinary glasses to store dry ice, understand the performance of the equipment used, and clarify the steps of the experiment. In the dry ice experiment, the operation rules should be followed, the phenomenon should be observed carefully, and the necessary data should be carefully recorded.

Use your brain to think positively about what you ca n’t do

Therefore, when taking an experimental class, do n’t just passively accept the knowledge taught by the teacher. It is important to work hard on your brain, think positively, focus your energy on understanding instead of memory, and find out why dry ice cannot be sealed and stored. If some problems are not understood for a while, ask the teacher as much as possible, and understand it by observing experiments and other methods, and only ask the teacher if necessary. The teacher may organize us to discuss in the class. At this time, we must actively participate and be brave to express our views. For example, how to form artificial precipitation of carbon dioxide dry ice, you can express your own opinions boldly. Develop the ability to exchange opinions and discuss issues with others scientifically, and maintain an attitude of asking for advice with an open mind.

Be careful while observing and thinking

Only know how much dry ice is in the experiment, why can't you touch it by hand? After the experiment, the obtained data should be analyzed to make a reasonable conclusion, and if necessary, some unclear problems should be further studied. In addition to doing experiments on your own, you must pay attention to observation experiments, analyze experimental phenomena, think deeply, draw the proper conclusions, and try to create conditions to do more simple small things outside the class. experiment. In daily life, we must pay attention to observe various dry ice phenomena, and use the chemical knowledge we have learned to analyze and study. This is also a good way to integrate theory with practice and improve thinking ability.

Enrich knowledge and active thinking by doing experiments

Through chemical experiments on solid carbon dioxide dry ice, students can be trained to observe and operate the experiment, help us understand the concept of forming dry ice and deepen and consolidate the basic knowledge of dry ice, but also develop a practical and serious scientific attitude. Verifying the theory through experimental dry ice not only learns what is not learned in books but also enriches knowledge and broadens our horizons. This is great for activating our thinking and improving our scientific thinking ability. Only in this way can we make The knowledge of dry ice came to mind.

dry ice making machine website:https://www.dry-ice-machine.com/dry-ice-granular-machine/

E-mail:allenshuliyguo@gmail.com

How to use the dry ice machine

1. Add water: Open the top cover of the dry ice machine and add water to the proper water level (refer to the line marking in the machine)

2. Turn on the power and turn on the heating switch on the panel (it is strictly forbidden to turn on this switch before adding water to prevent the heating tube from burning dry), and the heating indicator light is on.

The dry ice machine starts heating. When the water temperature reaches the set temperature, the dry ice machine automatically stops heating.

3. Set the appropriate temperature control temperature (not more than 90 degrees, generally 70-80 degrees).

4. From the machine's dry ice channel, pour dry ice, and then close the lid, take care not to be frostbite.

5. Turn on the fan switch, the machine has dry ice smoke.

Intentions for use: After using the dry ice machine, the temperature of the water will drop significantly. If you use it again, you must wait until the water temperature is heated to the set temperature, otherwise, it will affect the use effect.

Turn off the fan switch, the machine stops working.

Saturday, March 28, 2020

Technical issues related to dry ice cleaning

Q: Why use dry ice as the medium instead of sand or water?

A: Because the polishing power of sandblasting is very strong, the substrate may be scratched. In addition, the secondary processing of cleaning materials requires time and money.

Dry ice cleaning technology does not produce secondary pollution, and at the same time, it can clean some substrates that cannot be cleaned by water or sandblasting, such as circuit boards, electrical components, etc.

In addition, since sandblasting is not required, it is possible to clean the mold online.
The dry ice cleaning mechanism is thermally shrinkable, and degreasing cleaning is also possible because it uses volume expansion when sublimating from an individual to a gas.

Q: How much dry ice do you need?

A; It has a relationship with the cleaning substrate and the model of dry ice cleaning equipment, and the average dry ice consumption is about 30kg / h.

Q: What is the price of dry ice pellets?

A: About 6 yuan/kg, including freight. (At market prices)

Q: How effective is the dry ice cleaning?

A: Dry ice cleaning technology can be applied when lens cleaning and wheel mold cleaning, the effect is very good. No chemicals are needed, so don't worry about the chemicals remaining on the substrate.

Q: Can dry ice come in contact?

A: The temperature of dry ice is very low to minus 78.5 degrees. It is necessary to wear safety low-temperature gloves when contacting.

Q: Is there any noise in dry ice cleaning?

A: The sound from the device is about 80db to 95db. You need to wear soundproof earmuffs when operating.

Q: How much power does compressed air require?

A: The compressor capacity is from 0.4 mph to 1.4 mph. The same capacity is also required when using the factory.

Q: Are there any dirt that cannot be removed by dry ice cleaning?

A: The epoxy dye cannot be removed, the plating and the discoloration of the substrate itself.

Q: Is the equipment for cleaning precision molds the same as for ordinary molds?

A: There are two types of dry ice cleaning equipment:

3mm dry ice particle cleaner (for a wide area, serious pollution) and 0.75mm dry ice microparticle cleaner (for precision cleaning).

Q: Is carbon dioxide poisoning?

A: It will be affected in a closed environment. In this case, please install a ventilation fan or wear an oxygen mask.

Q: Is dry ice harmful to the environment?

A: Dry ice cleaning technology is also an environmental protection technology.

Liquefied carbon dioxide, which is the raw material for dry ice, can be reused and recovered from plants (such as petroleum refining and ammonia production) that produce large amounts of carbon dioxide (as a greenhouse gas) as a by-product of the reaction.
The National Environmental Research Institute has evaluated our dry ice cleaning as an environmentally friendly technology that effectively reduces waste and by-products in the manufacturing process.

Since some of the carbon dioxide released into the atmosphere is recovered and sold, this does not mean an increase in emissions. Even if the production of dry ice ceases, global emissions will not increase or decrease.

If you are interested in dry ice machine, welcome to our website to learn more about the function of the machine, or get more information by email

Website: https://www.dry-ice-machine.com/dry-ice-blasting-machine/

Email: allenshuliyguo@gmail.com

What are the advantages of dry ice blast cleaning?

In many cases, it is not very convenient to use water to clean equipment or items. Dry ice spray cleaning can make up for the disadvantages of water cleaning and prevent equipment or items from being damaged by moisture. So, what are the advantages of dry ice blast cleaning compared to other traditional cleaning methods? The following is the introduction of dry ice blast cleaning machine manufacturers.


1.Save costs

Dry ice is a solid form of carbon dioxide. Because carbon dioxide is one of the constituents of the atmosphere, it is very convenient to use and relatively cheap. When using dry ice spray cleaning, the power consumption equipment is only an air compressor, and dry ice is cleaning In the process, it can be volatilized directly, and there is no cost for cleaning the cleaning medium, so the cleaning cost is relatively saved.

2.No water during cleaning

When using dry ice spray cleaning, the cleaning process is always dry, which is completely different from steam and high-pressure water cleaning. Therefore, there will be no moisture residue when using dry ice to clean electrical wires, control components and switches No damage will be caused to this electrical equipment or components, and the possibility of rusting the equipment will be greatly reduced compared to water cleaning after cleaning.

3. Conducive to environmental protection

Carbon dioxide is a non-toxic substance that meets safety requirements set by the US Department of Agriculture, the Food and Drug Administration, and the Environmental Protection Agency. Using dry ice spray cleaning instead of toxic chemical cleaning, employees can fundamentally avoid chemical damage. In addition, dry ice particles are non-abrasive, and they will not damage the mold or damage tolerances when cleaning them, and will not damage bearings and machinery.

Through the introduction of this article, you can see that dry ice blast cleaning has many advantages. Therefore, many food processing, clothing dry cleaning and many manufacturing companies now use dry ice blast cleaning to clean products, thereby improving product cleaning Efficiency and can reduce the cost while improving the protection of the environment.

If you are interested in dry ice machine, welcome to our website to learn more about the function of the machine, or get more information by email

Website: https://www.dry-ice-machine.com/dry-ice-blasting-machine/

Email: allenshuliyguo@gmail.com

Friday, March 27, 2020

How to use the dry ice machine?

In the past two days, our customers in Australia, Kenya and Egypt received the dry ice machines ordered from us, but they have some questions about their use. Here we explain to you the dry ice pellet machine manufacturers.

 The dry ice machine we are talking about is actually a device for treating dirt on the surface of objects.

The working principle is very simple. Dry ice particles with extremely low temperatures are sprayed onto the cleaned object after being compressed by the dry ice machine. The extremely low temperature of the sprayed dry ice will cause the dirt on the surface of the object to cool or even freeze and crack. At the moment of ejection, it will quickly vaporize, and the volume will rapidly expand to 600, thereby removing the dirt from the surface of the object.

This equipment is not common in daily life, and is mostly used for dirt cleaning of various production molds such as metal die casting molds and tire molds.

However, when using a dry ice machine, it should be noted that dry ice stored in a cold box consumes 3% to 8% of dry ice per day. Therefore, long-term storage is not recommended. It can be used with production. In addition, when selecting a dry ice granulator, the user is required to select the equipment model according to the amount of use to avoid excessive waste of dry ice or too small a model for repeated production of dry ice.

  The above are the issues that should be paid attention to when using the dry ice machine. I hope it can be helpful to you

If you are interested in dry ice machine, welcome to our website to learn more about the function of the machine, or get more information by email

Website: https://www.dry-ice-machine.com/dry-ice-granular-machine/

Email: allenshuliyguo@gmail.com

Professional dry ice production equipment

Zhengzhou shuliy dry ice making machine is a hydraulically driven full-automatic production equipment. We can provide customers with dry ice pellets with diameters of 3, 6, 10 and 16mm. In daily work, the closed structure guarantees quality for dry ice production. TC120-5 is also an ideal tool for dry ice suppliers. It can independently produce and customize fresh dry ice according to customer needs.


The device realizes automatic operation, one-button push-button startup, and all functions are controlled by a built-in PLC. To ensure continuous operation, the PLC monitors the oil temperature, oil level, cycle time, motor overload, CO2 intake pressure and hydraulic pressure and displays it directly on the control panel.

Allowing the addition of an optional control system, this module can be set up to automatically connect various ice spray equipment or storage containers. The control system of the automatic filling system allows setting below a certain value to automatically start the dry ice granulator and automatically stop at a predetermined higher level.

If you are interested in this machine, welcome to our website to learn more about the function of the machine, or get more information by email

Website: https://www.dry-ice-machine.com/dry-ice-granular-machine/

Email: allenshuliyguo@gmail.com

The working principle of stage dry ice machine

Do you know how to achieve the fairy-like smoke effect on the stage we often see? In fact, most of them are practical dry ice machines , so ...